Unparalleled Steering Feedback Quality & Realism
Direct Drive Force Feedback System (Wheel connects directly to motor shaft, there are no belts to slip, wear or absorb critical detail)
Powerful, Low Inertia Motor supports up to 13Nm of sustained torque depending on the user selected mode *
Easily dial back the forces for safe use by friends and family
User selectable modes (similar to those on a stereo) allow easy selection of linear performance, peak performance, soft performance, child mode, etc.
Extreme efficiency (13Nm sustained torque at 100% stall for 30 minutes with 2°F temperature rise over ambient with 0% torque loss due to heat fade)
Excellent balance of torque and torque resolution results in an extremely refined and realistic feel
Torque peaks are removed by default to ensure a truly 1:1 linear experience (option to enable peaks is provided)
Up to 2000Hz Communication Rate via SimXperience Dual Stream Technology (1000Hz from Game / 1000Hz from Sim Commander software)
Motor updated 50,000 times per second / Realtime encoder processing
Lowest possible latency / lag due to integration of controller and motor drive system on a single circuit board and custom motor design
4500 degrees of rotation, configured for 900 degrees by default. User may opt to alter this setting in real-time
16,000 PPR (pulse per revolution) positional feedback
16-bit control loop resolution
Game provided instruction to movement time of less than 2ms (1ms to instruct + 1ms for game to read back instruction is a round trip 2ms)
Engineered for many years of reliable service in commercial environments. (Critical parts are stress tested for 300lb loads)
Includes FREE Sim Commander SimVibe and Steering system tuning / analysis software suite
Three force feedback (FFB) options: traditional raw game FFB, SimXperience / user optimized game FFB and completely user definable FFB
Robust tuning capability via touchscreen or in game heads up display via included software
Easily auto-optimize feedback for your driving style, driving line and a particular car/ track combination
Firmware updates are automatically delivered and install in seconds with a single button click. No need to hunt for them on a website
3-Port USB hub on back of base unit enclosure
Expansion ports for additional displays, buttons, pedals and rotary encoders.
Prezzo: circa 1500,00 €
---IN AGGIORNAMENTO---